RE: MINI FUNTANA POWER SETUP?
I converted mine to an AXi 2808/24...
I have an APC 10X5E prop on it, w/ a Kokam 2000 3cell, and an E-flite 20A esc.
I made sure that the openings of the esc are right behind an air inlet on the left side of the cowl, so it gets air flow through it.
I'm pulling 23.5A. (for bursts only ) on a fully charged batt. and I don't use full throttle for more than a few seconds at a time, and only while in flight to insure adequite air flow.
So far so good...