RCU Forums - View Single Post - Building a Laser3D
View Single Post
Old 11-18-2002 | 11:39 PM
  #98  
majesticmonkey
Senior Member
 
Joined: Jan 2002
Posts: 144
Likes: 0
Received 0 Likes on 0 Posts
From: Waterloo, ON, CANADA
Default Building a Laser3D

I've also broken off an elevator and another cracked just past the last hing and was only held together by the covering.

So please take our advice and do some sort of reenforcement (gussets or 3/8 sticks as already suggested)