Just completed initial flight test of Bdavisons Revolution II aircraft and have to say It flys excellent. I received the plane a few weeks ago and have been busy with other projects, but it was well worth the wait. 1st flight needed no trim whatsoever it flew straight as an arrow the plane does groove very nicely although the wind was around 10 mph it bucked the wind extremely well. The next flight the wind layed down a bit and I swapped out to a 9.38 prop from a 9.47 and it was even better lots of power and the plane hovers very well. I used the recommended BP21 with castle 18 esc 306 servo's and 1320 TP pack. Weight ready to fly 11.8 oz. Bryan you have a very good design airplane. I recommend it to anyone who wants a fast pattern style foamy which still can also perform 3d. I will have pictures soon check out www.revolutionaircraft.com Bill