RCU Forums - View Single Post - What setup for a9 oz. Scratch built 3d plane
Old 10-18-2005 | 05:09 PM
  #2  
gt_jumper's Avatar
gt_jumper
 
Joined: Feb 2005
Posts: 270
Likes: 0
Received 0 Likes on 0 Posts
From: townsvilleqld, AUSTRALIA
Default RE: What setup for a9 oz. Scratch built 3d plane

props i wouldnt know, i never do its trial and error but it never hurts to have a few around. id probably start with apc slow fly 10x4.7 or 9x3.8. something in the 3s1p 1000mah 15c would be a not bad start either