Well,
I had no luck in the forums finding specifics on anyone using the ever popular Eclipse 7 (which I use on all my nitros). So, I went out and bought the blade cp just to see what the micro craze was all about. Let me start by saying there is no way I would want to fly any heli w/o the ability to tweek my settings (as is the case with the included radio) and as of day one - this is all I had to do to get in a hover with my eclipse 7.

1. Modelselect---120deg heli and dialing in the channel w/ myspectra module
2. a. swash 1 +70
b. swash 2 +70
c. swash 6 +70
3. Throttle and pitch (at this point) 0/25/50/75/100
4. Hold @ -25
5. Channels 1,3,4,5,7 normal...2&6 reversed
6. Endpoints on the top of 1,2, and 6 at 72 to eliminate servo noise....low sides @ 100%

the safety light wouldn't go green w/o me setting up my throttle hold to -25 and flipping the switch into that position....already my habbit for nitro safety starting.

Obviously, this is just the begining so I'll ad more as I begin to fine tune myset up for looping under my vaulted cealing...happy winter heli flying indoors!!!