Balsa USA enforcer
Constrictor
This may be a little late, since your post was almost 2 months ago. But I just flew my enforcer today for the first time and it was awsome. From the table to the flight was easy. The wing builds flat upside down. The fuse construction is no problem. The hardist thing to do was to bend the sheeting over the fuse. The plans call for the alerons and the elevator to be connected with nylon push rods to the center of the wing front. I opted not to do this. I put servo's in the wing closer to the ale. & elev. for better control. ( I've never liked nyrods) On to the flight. On take off, the ground control is very good. But without rudder, on windy days it might be a handfull. Once off the ground it went straight up. I had it turn sharp then the heat was on. The thing acted like someone kicked it in the butt. It started hauling ass. Turns were very sharp, rolls was even better. The only thing that spooked me was, when I backed off the throttle. The thing shot straight up about 12 foot or so. That was freaky. As I came in for a landing the nose lifted up, the plane slowed to a crawl and it sat down like a dream. Landing slower than a walk. This is the best plane I've flown in a long while. Need I mention, all the other fliers wanting to see it fly ( big time attention getter ).