RCU Forums - View Single Post - 300s for 3d work
View Single Post
Old 11-13-2002 | 06:20 PM
  #5  
DGrant's Avatar
DGrant
My Feedback: (4)
 
Joined: Dec 2001
Posts: 2,198
Received 30 Likes on 27 Posts
From: Clovis, CA
Default 300s for 3d work

Don't forget about the GP Giles202. I've seen that one first hand, and flew one. It was powered with a .91 4-stroke and from what I could tell from flying, is much better suited to 3D stuff. Also, it builds farely light as a stock plane. Much newer design.