This is my latest project. It is the GP Extra 300 (60 size). I am powering it with and OS 120. My goal is not a 3D machine but a nice IMAC type aircraft. I am hoping that by going with the OS 1.20 I will get truly unlimited performance. I built it mostly stock other that increased sizes of the Elevator halves and Rudder. This is a picture before I Covered the tail. If I have time tommorow I will take a new picture of the plane with the tail covered and the cowl mounted.

Good Luck with your plane, looks great.

Phil (Mesa, AZ)

By the way, I have the GP Cap 232 and if you are looking for a great flying plane that builds very light you should look into that model. Mine is 5.5 WET with an OS 70 up front and stock servo locations with NO Lead.

Oh yea, before you ask about the Maple leaves here is the reason they are on the plane. http://www.fightercombat.com/airshow/Photos.htm I saw them at an airshow and liked there planes and flying style. Plane presents well in the air.