Gentlemen....Many good points made about kit Kutters...Laser vs. Hand cut...Hand drawn plans vs CAD plans.....But the bottom line here is the "BUILDER".........How much time is taken to make a plane straight and true.........Follow intructions...ask questions if necessary......make sure the Plane is mechanically sound .....take time to thoroughly"sand" and true wings, fuses ,stabs ..etc....Ck and double ck...that gentlemen "IS" what makes a "GOOD" flying airplane......That first day out at the field test flying a newly finished project.....and it performs as expected...thats when all the tedious and painstaking work pays off....now.....did it "REALLY" matter if it was a "laser" or "hand cut kit"....its a builders choice....ultimately thats who makes it a good "finished " product......Bill......
PULL BACK.....Houses get smaller....PUSH DOWN......Houses get bigger.....