RCU Forums - View Single Post - UCD 3D Thread II--Flight, Setup and Mod editon
Thread: UCD 3D Thread II--Flight, Setup and Mod editon
View Single Post
Old 11-21-2002 | 06:02 PM
  #23  
seanychen's Avatar
seanychen
Senior Member
My Feedback: (4)
 
Joined: Jul 2002
Posts: 2,914
Likes: 0
Received 0 Likes on 0 Posts
From: Canton, MI
Default UCD 3D Thread II--Flight, Setup and Mod editon
http://espritmodel.com/

Wingspan:
102" Length:
100" Weight:
21 lbs. Channels: (4-5)
Rudder/Elevator Ailerons/Flaps/Motor Engine: 3.6-4.8 glow

Diablotin XXL
$879
(ARF Classic-almost ready to fly)

$759
(ARC Classic-almost ready to cover)


At this moment the biggest Diablotin from huge Fun-Fly family of Diablotin models. This model is really show stopper, fully 3-D capable. Specially designed for aerobatic 1 scale 3D flying. Extremely light all balsa/plywood construction. Diablotin XXL comes in blue/yellow or red/yellow transparent covering.
(Always ask for color availability)!!!

Special Features:
- Tight covering with all seams hand-sealed
- Elegant gel-coated yellow fiberglass CAP style cowl and wheel pants
- Clear canopy
- Ready-built balsa rib/spar two-pieces plug-in wing and stabilizer
- Pre-cut hinge pockets
- Transparent Ultracote on wing and balsa tail parts
- Includes all necessary hardware and CAD detailed drawing
- Aluminum landing gear
- Elevators servos installed in the stabilizer
- Two servos per aileron


Airfoil : Special
Wing area :
Wing loading :
Empty weight :
seanychen is offline  
Reply Like