RCU Forums - View Single Post - CMP Kits – Problems and Solutions
View Single Post
Old 02-09-2006 | 01:30 PM
  #74  
wellington53
Junior Member
 
Joined: Dec 2004
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
From: OCONTO FALLS, WI
Default RE: CMP Kits – Problems and Solutions

I purchased the CMP .40 size P-51 Mustang. The build went well and I used everything in the kit. Nothing was missing either. The engine of choice was an OS .46. The balance came out really nose heavy with a weight at 6 pounds, but went ahead with the maiden anyway. Gave full throttle and she took off. Immediately she wanted to bank to the left so I tried to trim her but she still wasn't right. I then re-maidened her with as much right hand engine torque as possible which made it a little better. The problem must be wing warp Right? I don't like it!
Glenn.