[img][/img]
ORIGINAL: frikinstik
instruction manual says,
"the balance point is shown on the plans and is approximately 7-5/8" back from the leading edge where the wing meets the fuselage. the plane should be balanced right side up on the balancer. .... DO NOT BALANCE THE MODEL BEHIND THE MODEL BEHIND THE CG ON THE PLANS. DOING SO WILL MAKE THE MODEL DIFFICULT AND UNSAFE TO FLY.
CONTROL SURFACE THROWS
ailerons: 1/4 - 3/8up, 1/4 - 3/8 down
elevator: 1/4 -3/8up, 1/4 -3/8 down
rudder: 1/2 - 3/4left, 1/2 -3/4right
optional flaps 1/2 down.
cant remember how to post pix here, dag nab it