RCU Forums - View Single Post - 3d flying upgrade
View Single Post
Old 03-01-2006 | 07:28 PM
  #16  
spec36's Avatar
spec36
Senior Member
 
Joined: Feb 2006
Posts: 212
Likes: 0
Received 0 Likes on 0 Posts
From: huntsville, AL
Default RE: 3d flying upgrade

maybe i should start a new subject on the funtana setup... ok got to fly today and all went well (i mean no crash ) but still wonder about its flight characteristics. To start with all takeoffs are going smooth and feel good; as well as the landings. Those are superb. But when in normal flight, when you apply back pressure in a left turn the right wing drops. To a point to where you have to increase input on the stick. That is the main thing that bugs me and I can't figure it out. maybe someone can help me out here the CG is still @6 to 6 1/8 the stabs all look true to me .. after a bit of time flyin I got better with it like being ahead of the fallin wing maybe its just me? it seams to want to drop the same wing in a right hand turn like go inverted. is this a tip stall???