Finally Here!
05-27-2004 | 08:30 PM
#1
Thread Starter
Member
Joined: Sep 2003
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
From: The Woodlands,
TX
Finally Here!
New Batteries website:
Falcon Batteries
I've been flying a test 830 3S1P pack for a couple of months and they are awsome.
The site is still under construction, but there's alot of great info available!
Batteries are currently sold at New Creations R/C
I get 15-16 min. flights on the 830 Mah 3S1P ( 2 oz. ) running a 13.5 oz. AUW Flex 3D with an AXI 2212/26 and a CC10 ESC (9 volt cut-off) and an APC11x4.7SF. WOT amps is 14.5+. Hover is at half throttle at 3.5-4 amps. I don't hold WOT more than 15-20 sec., long enough to climb up for Blenders and such! Battery always comes out avout 140°F or less. I'm getting an 1100Mah soon and will push to 20-25 min. flights!!
Falcon Batteries
I've been flying a test 830 3S1P pack for a couple of months and they are awsome.
The site is still under construction, but there's alot of great info available!
Batteries are currently sold at New Creations R/C
I get 15-16 min. flights on the 830 Mah 3S1P ( 2 oz. ) running a 13.5 oz. AUW Flex 3D with an AXI 2212/26 and a CC10 ESC (9 volt cut-off) and an APC11x4.7SF. WOT amps is 14.5+. Hover is at half throttle at 3.5-4 amps. I don't hold WOT more than 15-20 sec., long enough to climb up for Blenders and such! Battery always comes out avout 140°F or less. I'm getting an 1100Mah soon and will push to 20-25 min. flights!!
