Edge 540
05-10-2006 | 08:39 PM
#1
Thread Starter
Senior Member
Joined: Dec 2001
Posts: 1,309
Likes: 0
Received 0 Likes
on
0 Posts
From: Rowlett,
TX
Edge 540
I am not an electric guy but one of our club members brought this to show and tell.
Michael brought in an Edge 540 from http://airfoilz.com/index.html It is mostly foam with some balsa stiffeners and a balsa spar. It's different from many foam planes; it has a fully symmetrical airfoil rather than just a flat surface. The web site says it can handle 15+ mph wind. He has done a video for the manufacturer. It’s available online at http://www.youtube.com/watch?v=Z0DXHM4ta3s If you don’t have high speed internet it’s a long download. It’s fun to watch.
Michael brought in an Edge 540 from http://airfoilz.com/index.html It is mostly foam with some balsa stiffeners and a balsa spar. It's different from many foam planes; it has a fully symmetrical airfoil rather than just a flat surface. The web site says it can handle 15+ mph wind. He has done a video for the manufacturer. It’s available online at http://www.youtube.com/watch?v=Z0DXHM4ta3s If you don’t have high speed internet it’s a long download. It’s fun to watch.
05-11-2006 | 04:34 PM
#3
Thread Starter
Senior Member
Joined: Dec 2001
Posts: 1,309
Likes: 0
Received 0 Likes
on
0 Posts
From: Rowlett,
TX
RE: Edge 540
Hi Leblanc,
I didn't post the message seeking info, it was just to share the link to the video.
I just enjoy watching Michael fly any airplane and I thought some other people might enjoy the video too.
I didn't post the message seeking info, it was just to share the link to the video.
I just enjoy watching Michael fly any airplane and I thought some other people might enjoy the video too.
