|
Lets See Your 3Dfoamy!
I just finished my 3dFoamy Edge 540 and absolutely LOVE it! Its by far the best foamy ive built so far to date. How many other people fly this plane or similar? Talk about mods, flight reports, or just chat about 3d foamies in general. I LOVE THIS PLANE! Its my first attempt at painting foam, and im wondering what kind of tape to use so the paint does not bleed throught and also easy enough to get off w/o peeling the paint off.
|
RE: Lets See Your 3Dfoamy!
1 Attachment(s)
E Flite Extra 260 profile.
300 motor,18 amp 640 mha It flies ok,very stable in Harrier and inverted,KE is a bit wobbly.Great beater |
RE: Lets See Your 3Dfoamy!
Charger RC CR-1 Foamy
Himaxx HC 2812-1080 motor, CC Phoenix 25, TP 3cell 2100 mah, Electrifly 3 cell, 640 mah batteries, HS-55 servos, Cirrus MRX-6 reviever. Hover is pretty good, but not the best. Snap rolls=easy, harriers= simple. http://img216.imageshack.us/img216/4475/img2429mu8.jpg |
RE: Lets See Your 3Dfoamy!
1 Attachment(s)
Here's my Clik XL 52" wingspan. Scaled it up from the Clik F3P kit. Does 3D and pattern. Lots of fun! Also did a 28" version for my friend to test out his MicroDan F3P motor. No wing rock during elevators or harriers(inverted and upright). Also working on a full fuse version with airfoiled wing.
http://www.rcuvideos.com/item/MNWYQGZQDXHCK9RY |
RE: Lets See Your 3Dfoamy!
keep em coming guys! ill post pics of my edge as soon as i can maybe also a vid.
|
RE: Lets See Your 3Dfoamy!
Mmmm, that plane looks like it performs great. This forum may give me ideas for another plane.
|
RE: Lets See Your 3Dfoamy!
Here is my latest 3DFoamy.. The SU26 Pro... Great flyer...!!!! I'm just waiting for John to get more in stock! LOL
http://www.rcuniverse.com/gallery/ga...memid%3D168694 http://www.rcuniverse.com/gallery/ga...memid%3D168694 Well it is in my gallery... I'm not sure what I'm doing wrong with getting it displayed... Hibrass |
RE: Lets See Your 3Dfoamy!
oh by the way, my edge has a Rimfire 22M w BL-8 and 640mAh. HS-55 servos all round.
|
RE: Lets See Your 3Dfoamy!
1 Attachment(s)
CR-1 in the garage.Olin
|
RE: Lets See Your 3Dfoamy!
what kind of tape does everyone use for masking on thier foamies? idk what do use so the paint doesnt peel off with the foam...
|
RE: Lets See Your 3Dfoamy!
On the one in my pic i posted i used Krylon H2O,a latex spray,blue painters tape.Olin
|
RE: Lets See Your 3Dfoamy!
1 Attachment(s)
AirfoilZ Yak, Scorpion Motor, Phoenix 25.
|
RE: Lets See Your 3Dfoamy!
Pics...
|
RE: Lets See Your 3Dfoamy!
1 Attachment(s)
please dont dis the paint...first time ever painting foam.
more.... |
RE: Lets See Your 3Dfoamy!
couple of pics...
RedBull 540 Flatout Hover, http://i101.photobucket.com/albums/m...002_resize.jpg AirfoilZ Yak 54 Hover, http://i101.photobucket.com/albums/m...ak54Hovers.jpg |
RE: Lets See Your 3Dfoamy!
1 Attachment(s)
|
RE: Lets See Your 3Dfoamy!
coonak I LOVE THAT PHOTO OF U HOVERIN OVER YOUR PLANEZ!!![sm=bananahead.gif][sm=bananahead.gif][sm=bananahead.gif]
|
RE: Lets See Your 3Dfoamy!
1 Attachment(s)
Great Planes Flatout Turmoil. I love the SFG's. They make knife edge very sensitive. Rimfire 22M, 9x4.7 GWS, TP 730 Mah, Hitec 05S and HS-55's.
|
RE: Lets See Your 3Dfoamy!
I am new on the internet just hooked up a web cam will send you a picture of my Edge 540 foamy
as soon as I learn how to. Like the looks of your Tourmoil. I started out witlh a Minimax 5yrs ago, went thru several parkflyers,E-Flite Ultimate.2 Tensors.1 Tribute.am working on a scratch built Eclispe. Have been flying a Fliton Prodigy, great flyer does whatever you ask it, it was given to me already built .I put an alinge 450 outrunner apc 10x3.8,4.,hitec 55 servos ,thunderbird 36 esc common sense 2100 3s lipo. on it. On the 3rd flite the right wing folded just after takeoff when I do my signature roll out. Oh well it is repairable.will be back in the air soon!! PS I fly almost everyday have lots of planes. More later after I figure out the webcam. Alan3dflyr |
RE: Lets See Your 3Dfoamy!
just enlarged the 3dBatix Diablo plans at Fedex Kinkos. Does anyone else fly this plane? if so how she fly?
|
RE: Lets See Your 3Dfoamy!
Does anyone know if 3DFoamy is still in business? They took my PayPal order, took the money, never shipped the items ordered, and don't respond to multiple emails. Are they still in business?
|
RE: Lets See Your 3Dfoamy!
1 Attachment(s)
Here comes mine.
|
| All times are GMT -8. The time now is 04:32 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.