You can do 3-d
09-23-2002 | 04:57 PM
#1
Thread Starter
Junior Member
Joined: Jun 2002
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
From: New York
You can do 3-d
To all you guys out there that are set up , What do you recommend for servos. Best and or least expensive .....
...............I am running a Futaba t6x computer radio..............
...............I am running a Futaba t6x computer radio..............
09-23-2002 | 06:36 PM
#2
Senior Member
Joined: Jan 2002
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
From: Austin, TX
You can do 3-d
I have JR DS368's on everything but the rudder, where I have a JR DS9411.
The 368's weigh 0.8 oz each and the 9411 1.3 oz. All surfaces have plenty of authority and speed. I spent major $$ on these servos to get the lightest weight possible in what I feel is the most reliable package.
The 368's weigh 0.8 oz each and the 9411 1.3 oz. All surfaces have plenty of authority and speed. I spent major $$ on these servos to get the lightest weight possible in what I feel is the most reliable package.
09-23-2002 | 07:01 PM
#3
You can do 3-d
I am in the proccess of putting mine together, and getting a new wing for it.
I am going to use Saito 91 w/15x4W APC prop
Standard Jr BB servo's on elevators, and alierons (rated for 42oz)
Hitech 225 on throttle,
Hitech 605 on rudder. (rated for 77oz)
4.8miliamp batt. pack.
My brother flew his 1st one w/ all stand. JR BB. power was YS61. and all servos held up.
Also going w/ all 4-40 rods w/ metal clevis'
I am going to use Saito 91 w/15x4W APC prop
Standard Jr BB servo's on elevators, and alierons (rated for 42oz)
Hitech 225 on throttle,
Hitech 605 on rudder. (rated for 77oz)
4.8miliamp batt. pack.
My brother flew his 1st one w/ all stand. JR BB. power was YS61. and all servos held up.
Also going w/ all 4-40 rods w/ metal clevis'
09-23-2002 | 07:22 PM
#4
Senior Member
My Feedback: (2)
Joined: Feb 2002
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
From: Covington,
LA
You can do 3-d
I used Hitec HS 615's on elevator
HS 645 on rudder
HS 605's on ailerons
JR 517 on throttle
Because I already had them,But I do think they are good choicesI think you will need more than standard servos to get maximum performance.JMO
Mike.
HS 645 on rudder
HS 605's on ailerons
JR 517 on throttle
Because I already had them,But I do think they are good choicesI think you will need more than standard servos to get maximum performance.JMO
Mike.
