Hitec 5955 Problem
#1
Thread Starter

My Feedback: (5)
Joined: Jun 2004
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
From: Tuckerton,
NJ
Has anyone had problems with this servo. I just got it and when I plug it in and move the rudder it glitches so bad. I am running 4 5945's and they work perfect, but when the rudder servo glitches the elevator servos glitch also. I'm running a 4000mah 7.4v Duralite with 6v regulator. Any ideas what might be wrong here? Thanks
#2
Senior Member
My Feedback: (28)
Joined: Jun 2004
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
From: Longwood,
FL
I just installed 5 in an 87" EF Yak and they work flawlessly. And as much as people poo poo Hitec servos I have never really had a problem with them. I have heard however that if they are going to fail they will do it immediately. I too am running a LiIon 4800ma pack through a MPI miracle switch which also includes a 6v regulator. I would contact Hitec directly and send it back for replacement. Interesting note, of all servos I have ever heard having problems it's the 5945s.
Good luck
JP
Good luck
JP



