Prop Selection---H9 CAP/Moki 1.8
12-26-2002 | 01:48 AM
#1
Thread Starter
Junior Member
My Feedback: (7)
Joined: Apr 2002
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
From: Vero Beach,
FL
Prop Selection---H9 CAP/Moki 1.8
Can anybody suggest best prop (brand and size) for Moki 1.8 in Hangar 9 Cap 232, approx 13 lb. I'm looking for best vertical performance, don't care about speed.
Thanks
Bob G
Thanks
Bob G
12-26-2002 | 05:15 AM
#2
Member
My Feedback: (1)
Joined: Nov 2002
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
From: La Mesa, CA
Prop Selection
I have a hangar 9 Edge 540 currently using an OS 1.60FX running 15% Powermaster, spining JZinger 18X8 props. Hovers just above 1/2 throttle, and will climb unrestricted at full power. Max TACH'd rpm ts 7550.
12-26-2002 | 02:54 PM
#4
Senior Member
My Feedback: (33)
Joined: Jul 2002
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
From: Oxford, MS
Prop Selection---H9 CAP/Moki 1.8
the best prop i found on a moki 1.8 is the bolly 19x8. this prop should give any 12-14 lb plane unlimited vertical . the prop is a great hovering prop too as for the speed it is called throttle management. 
Chad
Chad
12-27-2002 | 11:00 PM
#6
Senior Member
My Feedback: (33)
Joined: Jul 2002
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
From: Oxford, MS
Prop Selection---H9 CAP/Moki 1.8
Originally posted by h82crash
Chad is about right, may even try a 20-8. The Moki should have no problem with it. A 20-8 has great 3D on my H9 Edge.
Chad is about right, may even try a 20-8. The Moki should have no problem with it. A 20-8 has great 3D on my H9 Edge.
Chad
