Modeltech Magic
 

Hey,

Just wondering if anyone had suggestions for engines on the magic. I have looked at some reviews and they say lighter is best. Would the O.S. 32 SX be good enough to pull It out of a hover? Or am i better off with a .46 FX for the power? ;) Any other recommendations for engines? I want a powerful, maneuverable plane.

Thanks in advance,

Navy

Modeltech Magic
 

Hi,
I have a Webra 50 in mine and it goes up llike a rocket. I have heard that it will hover with an LA 40. I think both of your choices would work fine. I would go with the 32. Should be plenty of power.

Modeltech Magic
 

I have a ST.45 on mine with a pitts muffler. got weight wrapped around the tail wire, but it flies GREAT; but then it flew great with an MVVS .40 on it also. If you get a .45 use an APC 12.25x3.75 prop.

Modeltech Magic
 

I dont have one so I dont know but guys around here are flying them with the TT .36 and they seem to pull out of hover fine.

thanks
 

Thanks to all who responded. I think i will go with the os 32 (more output than 40 LA, equal to the TT 36, but lighter than both.) thanks again guys. :D

Modeltech Magic
 

I dont know if a magic will hover on a stock OS LA 40. With a pipe it probably will. My dad has an OS LA 46 on his with a mac pipe, 11x4 and it hovers easy. So any of your motors will work with it.
Im going to put a YS 63 in mine when I get to it!!!!

Modeltech Magic
 

Mine will hover and torqu roll with a stock Thunder tiger GP42, APC 12.25 x 3.75 and I have 3/4 oz. of lead on the tail.

Lou

Modeltech Magic
 

Go light and powerful, irvine 39 (extremly poverfull on a small price)

Or

A west eurotech 36t1 and pipe, but i dont know if you can get these in the US. all i can say is there amazing. They are more expencive, but your paying for the best.

Ian

Modeltech Magic
 

Anybody doing brushless in this model ?

Jim

Modeltech Magic
 

Ha, Navy! I have a 36 TT in my magic,with a macs shorty pipe. It hovers and pulls out fine.The planes weight is 4.1lbs.Could be lighter but I used a du-bro isolated mount went with HS 225mg all around on 4.8v. P.S elevation were I fly is 2200 asl Have Fun! Butch.

Modeltech Magic
 

Jim,

Check out this site: http://www.megamotorusa.com/

They have some videos of the Magic 3D they are flying on electric power. Looks like it hovers easily with great pullout.

Just found the link directly to the videos. Here you go: http://www.megamotorusa.com/videos/mega-magic.htm

Wade

Modeltech Magic
 

I had a OS 32 SF with an Ultrathrust muffler on my Magic and it ROCKETED out of a hover, power to BURN! :D

Josh

Modeltech Magic
 

I have a friend that has a TT 42GP w/mousse muffler on his Magic 3D. It flies the plane great just flying around, but he isn't too pleased with the power in a hover and especially in pullout from a hover. It's a new motor so maybe it will get better with some runtime. He probably needs to experiment with some different props. I think his plane is a few ounces under 4lbs. Maybe this much weight is a little too much for the 42 when it comes to hover pullout authority. Any ideas?

Wade

Modeltech Magic
 

The GP range arnt that powerfull. go iurvine 39!

Modeltech Magic
 

There's been a few guys on here that have said the GP 42 with mousse setup had plenty of pullout from a hover. Maybe his plane is a little heavier than some.

Modeltech Magic
 

Whats a 'mousse' setup

Modeltech Magic
 

Check out this thread for info on the mousse can muffler:

http://www.rcuniverse.com/showthread...se+can+muffler]

Magic with O.S. 52 FS
 

I just got a Magic, from a buddy, and he had a Magnum 52 FS. He turned a 12X5, so I thought the O.S. turn at least a 12X6. WELL..
I flew this plane this morning, and it will actually hover just above idle. This set-up is a heaver engine then you were looking for, but the overall result is incredible.

bobbdd

Modeltech Magic
 

One guy on here tried a Saito 40 on his Magic, but I think he said it could use a little more power.

Wade

Modeltech Magic
 

i had a magic(fluttered ailerons going vertical;( )i would definately go with a .46fx. You will find it is cheaper to buy the best stuff first insead of somethin else and not be satisfied with it, but it is up to you

Modeltech Magic
 

In the middle of putting a Magic together myself...... I'll be using an OS.52 on mine swinging a 12-5...............
Judging by those videos above, the Magic looks to be a bit unstable............. maybe it's just there setup......................

Modeltech Magic
 

Its a very light plane. proberbly 1.6kg (sorry dont know it in lbs)

Also it could be windy, and with a thick section like that it'll be blown all over the place

Ian

Modeltech Magic
 

Leo 37 from Just Engines, cheap and VERY powerful!

Modeltech Magic
 

I have a OS 40 LA in mine and it doesn't have unlimited vertical.
Anyone ever run a Rossi .40, they say it has 2.0 HP? That's more than a .46 and others.

Modeltech Magic
 

No No No No NO

Use a LIGHT engine. This will make the CG further back without having to add weight. I have 2 of these. one with a 46 and one with a 36. the 36 out perform the 46 bye miles. you need low weight=low wing loading=low speeds

Use a 32-39

Nouthing else

Ian