I've been using the brake function for about 6 months now on CC10, 25, 80, 45HV, and 85HV.

I'm running between 15-20% on little stuff - Eflite 370 and 400s, Hacker A20M and A20L, Lens, and AXI 2204. On a B50-11S 6.7:1, 8% is good. On the Pletty 30-10, 20% is good. I usually run 0 or 0.1 sec delay, with fast or very fast ramp.

Certainly is nice to have the same software available free for all CC ESCs. Neatest thing about it so far for flying F3A is that the same brake setting seems to be just right for both vertical downlines and 45 downlines, owing to the design of the brake circuit which applies a variable amount of brake based on the available braking power.

Regards,

Dave Lockhart
Team JR, Team Castle Creations