RCU Forums - View Single Post - Bulkless Conversion Problem
View Single Post
Old 03-19-2006 | 10:57 AM
  #6  
cardgabe
Senior Member
 
Joined: Sep 2005
Posts: 219
Likes: 0
Received 0 Likes on 0 Posts
From: Muskegon, MI
Default RE: Bulkless Conversion Problem

Thanks for the info guys... after removing the diffs and everything, they seems to spin ok. Then after reinstalling them, they didn't. Turns out... the center drive shaft was a little too long and wedged in there.