RCU Forums - View Single Post - Interference at Floyd Bennet?
View Single Post
Old 03-27-2006 | 08:14 PM
  #19  
EASYTIGER
Banned
My Feedback: (119)
 
Joined: Dec 2001
Posts: 7,676
Likes: 0
Received 1 Like on 1 Post
From: nyc, NY
Default RE: Interference at Floyd Bennet?

ORIGINAL: rhklenke

No, I think you're right, I believe that the 127 is Futaba's main-line PPM RX (or is one of them anyway). I just don't think that this receiver is very "tight" for lack of a better word, in maintaining good contact with the TX in the midst of any significant interference.

From what you described, you were having an issue with an outside interference source and you need to try and figure out what was going on there (I don't believe it was the radar either), its just that from what I've heard and my experience, the 127 will have issues long before the Futaba PCM stuff will...

I don't have 16 planes (wow!), but I do have more than the number of PCM RX's I have and so I do an RX swap when I need to. The acquisition of the DX6 will help that tho as the 148 that was in my TRex will be coming out in favor of a DX6 RX so I'll have one more PCM RX to throw in the mix...

Bob
Several of the receivers in question were the R148, I checked today.
And I FLEW again today, in the same place, with no problems.

I'm stumped on this one. But I don't want to do a whole change in my operations because of one day's problems just yet....
I also don't feel a need to convert over to PCM, like Enrique, I have had no problems(till the other day!) with PPM...