RCU Forums - View Single Post - GP CAP 232 3D ARF
View Single Post
Old 03-30-2006 | 10:26 PM
  #42  
CAPtain232
My Feedback: (40)
 
Joined: Dec 2001
Posts: 2,476
Likes: 0
Received 0 Likes on 0 Posts
From: Waynetown, IN
Default RE: GP CAP 232 3D ARF

I do not think you will be happy with a 40 or 50 cc gasser on this plane. Obviously it will fly, but the wing area is still too low for a 14 to 15 pound plane...... If you can get the new BME 55, That should help keep you at 13 pounds or less..... I believe this would be the best setup for this plane, but you will have to wait for the engine.

I have flown several planes that weighed about 12 pounds with the OS 1.60 and they all performed well provided they had sufficient wing area. More than enough verticle power.


LIGHTER IS BETTER