HAS ANYONE FLOWN THE TT G-202 140?

I AM CURRENTLY BUILDING ONE AND HAVE FOUND SOME ODDITIES.

1- THE HOZ. STAB IS TWO PC. ON CARBON TUBES THE STAB FITS THE TUBES AND THE FUSE FINE BUT HAS 1/4" SWEEP BACK.

2- THE WING JOINER IS 4 - 1/8" PLYWOOD PLATES LAMINATED TO FORM ONE (NORMAL) BUT THE JOINER IS 4" TO LONG, THE SOCKETS IN THE WINGS ARE 2" TO SHALLOW TO EXCEPT THE JOINER.

3- THE PLASTIC COCKPIT IS AT BEST HALF @$$ED GLUED ON.

4- THE BELLY PAN ON MINE IS CUT TO DEEP AT THE BACK AND FITS VERY POOR.

5- THE PAINT ON COWL IS DRY AND FULL OF FISH EYES (RED ONLY)

I AM IN NO WAY BASHING THUNDER TIGER. I JUST RECENTLY BUILT THEIR STAUDACHER AND IT WAS A #1 AND THERE 40 SIZE GILES WAS FINE ALSO, BUT WHEN I CONTACTED ACE WITH THESE ISSUES I WAS LESS THAN SATISFIED WITH THE ANSWERS AND THE MANNER IN WHICH IS WAS GIVEN TO ME.

RANDY WISHON

SENIOR ENGINEER
PROGRESSIVE TECHNOLOGIES INC.
[email protected]