RCU Forums - View Single Post - Working on the SKID
View Single Post
Old 04-05-2006 | 11:08 AM
  #5  
BobH
My Feedback: (2)
 
Joined: Mar 2003
Posts: 8,049
Received 21 Likes on 21 Posts
From: Springfield, VA,
Default RE: Working on the SKID

I did some searching on the net about the tail skid on that plane and I didn't find anything conclusive that would tell me if it was just a tail skid OR it had a small wheel inside a fairing. If I were you I might try locating some drawings on the plane... Or.. just put a small thin wheel inside a fairing.