Hey guys,

I have just finished my ultimate, and it's looking pretty good. I have put a 10x4.7 prop and it's hovering at half throttle. Pretty good remembering that have built this whole this with 6 min epoxy. I'm going to try an 11x4.7 on it, and we'll see.

I am wondering, I have a e-flite 10 AMP esc on it and I am just wondering, would I be pushing it a little by putting the 11x4.7 prop on it?

Can somebody test on a meter to see how much it's pulling with the 11x4.7?
I have the park 400 outrunner 740kv and am running a 1320TP battery 12-15C 3C.

This help would be greatly appreciated!

Thanks

LeBlanc