I just got this plane and need help!
I joined the wing halves last night and installed the horz stab.

Can the elevator servos be installed in the cutouts provided and work correctly with only a Y harness?

I have a saito 150 needing a ride, but, seems most folks are satisfied with a 91fx and LHS has one in stock as well as a 108, what to do??

Im new to arfs, but, looks like this thing needs a good dose of epoxy around the firewall and landing gear area as well as most other joints ect.
Is it standard practice to need to reglue arfs??
Besides this, all else seems to be of better quality than Id ever expected, nice plane.

I enjoy building at least as much as flying, but, due to poor flying lately, Im left with many repairs and need to go fly which is why I decided to go with a couple of arfs.

I intend to install flying wires, but had hoped to keep mods down to a minimum in order to go have fun now.
Looks like the engine mount screws and blind nuts are going to have to go also, seem rather small to me?

Im no hotdog 3d pilot, just wanted a nice, fun to fly plane in a hurry. Any input I can get will be most appreciated to keep head and heartaches down.
Thanks a bunch!