RCU Forums - View Single Post - Wm Extra 300s 80''
View Single Post
Old 01-21-2003 | 04:09 AM
  #47  
tocflyr540
Member
 
Joined: Mar 2002
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
From: Woodland california
Default Wm Extra 300s 80''

hey all i put 4 flights on the extra today with the taurus 52 and hitec digitals all around.

flight one: takeoff slightly out of trim and too much elevator throw but when trimmed it flew great

flight two takeoff into outside snaproll or so i thought it would do but was surprised when it went into an uncontrollable wild lomchevok and came out when i released the sticks. i did the pattern stuff and flew part of the basic imac sequence and it did that very well.

flight 3- now it was time for freestyle. takeoff accelerate vertical and transition into a high alpha rolling circle. i also did some waterfalls and those were as good as the h9 1/3 cap232 and kept right on track and rotated around the wingtip fairly quickly and i also did some knife edge which was great needing only a little coulpling but nothing too severe. this airplane knife edge loops very well and hovers very well i also performed alot of flatspins which the airplane came out of very easily.

flight 4 was alot like flight 3 and i also tried an elevator which was really sweet because there was very litle wing rock and with a little spoileron mixing it would stop.