RCU Forums - View Single Post - How close can RX component get to Magneto before problems?
Thread: How close can RX component get to Magneto before problems?
View Single Post
Old 05-04-2006 | 07:15 PM
  #1  
Magna
Senior Member
 
Joined: Oct 2002
Posts: 990
Likes: 0
Received 0 Likes on 0 Posts
From: Malaysia, MALAYSIA
Default How close can RX component get to Magneto before problems?
Building my GP Super Stearman now with G26 magneto. Almost done, prolly maiden this weekend. The RX, batt packs, and switches is about 10-11in away from the magneto. I can swap the RX to another location next which will give another 3 in away for a total of 14in from magneto. The RX will be about 1in from servos. The RX pack have to be in the 10-11in away from magneto for balancing.

I know a lot of folks using the G26 magneto for this plane. Not sure if they have done a lot of mod to shield the potential interference/noise.

Any thoughts?

Magna is offline  
Reply Like