I just wanted to make sure I do this right. I have a Heli battery it is a 10 cell batt. On the battery is stamped
Fullymax fbc6a21
Ni-MH 44AAA 650mAH p 12.0v
On the ac/dc adaptor is
Output: DC15v 400mA

So on my display I have
NiMH 10cell 600mAH???? the battery said 650 so could I use 700 or is it safer to use 600 because you can not select 650.
chg current: 0.4A ?? I think this is right.
dchg current:???
peak sens: ???
dchg volt:???
trickle curr:???
cut-off temp: ???
no. of cycles: ???
cycle delay:???
cycle mode:???
max chg capa:???
peak delay:???
top-off chg:???

Thanks for any help on this. If you have any insight on how to best figure out these values please let me know.