I just got done pulling all the hot glue from the back side of the firewall. It is scary how easy that stuff came out with a hemostat. Just grab the corner of it, and it all pulled right clean off the wood. Now for the fun stuff, applying epoxy and little 1/2 sections of triangle stock all the way around the firewall joint. I cannot believe H9 expected us to bolt there 1.0 paint shaker to the front of this.[X(] It would kinda belike trying to fly Santa's Sleigh when Rudolph decided to fly on his own. 90 percent of the hot melt they put on firewall was not even contacting both surfaces. I have a whole lunch bagy full of hot melt glue, maybe I should send it to Horizon.