RCU Forums - View Single Post - H9 NEW F6F HELLCAT PROBLEMS
Thread: H9 NEW F6F HELLCAT PROBLEMS
View Single Post
Old 06-28-2006 | 12:03 AM
  #13  
SDH
Junior Member
 
Joined: Jul 2002
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
From: Bakersfield, CA
Default RE: H9 NEW F6F HELLCAT PROBLEMS
ORIGINAL: redneckteddy103

THESE ARE JUST A FEW OF THE PROBLEMS I HAVE FOUNF IN THIS ARF
1 THE FIREWALL IS GLUED IN VERY SLOOPY AND I DONT TRUST IT WITH AN .049
2 THE FIREWALL IS TOO THIN I WILL BE CUTING IT OUT AND REPLACEING IT WITH FULL 1/4 INCH PLYWOOD
3 THERE IS NO SUPORT FOR THE PUSH RODS IN THE AFT OF THE FUSE
4 THERE IS UNNEEDED GLUE EVERYWHERE ON THIS THING
Well there's your problem Teddy, you're over powering it with that .049. Go to an .020 and I guaranty the firewall will be plenty stout. Let us know how it flies and don't forget to post some pictures. Hehehe. [:@]

Steve Hulse
SDH is offline  
Reply Like