RCU Forums - View Single Post - Signal problem
View Single Post
Old 06-29-2006 | 02:55 AM
  #3  
Charlie's Avatar
Charlie
Senior Member
 
Joined: Dec 2001
Posts: 2,586
Likes: 0
Received 0 Likes on 0 Posts
From: Fredericton, NB, CANADA
Default RE: Signal problem

Im using a Futaba 9ch and a 9 channel pcm receiver with a deans antenna.All the wires seem to be plugged in ok. Im not sure where i should look for this problem
The first place I would start looking is the Deans antenna. It seems to be a hit and miss with those base load antennas. I read where people have had good luck with them and I have read where people have had nothing but problems. Personally myself, I leave the original antenna on the receiver and I have never had a problem. Buy or borrow another receiver and try it, that would be a good place to start.