Well ive had mymultiplex microjet on the worktable for about a week now and tonight i finally got the guts to test fly it. I installed an Eflite brushless 400 inrunner with a collet and the stock prop. A thunderbird 18A speed control, hitec reciever and tried the 1st flight with an 11V lipo. CRAAAAAAAAAAAAAZZZZYYYY The 1st 2 flights were about 30 secs each until I got it trimmed out right then I decided the 11V was too much for me right away since ive never flown jets B4 so i used a 7.4V lipo..Way better. It flew amazing at about a third throttle and when i hit full throttle it still rocked even with the 7V. Once you get this jet trimmed right and get it tamed its an awesome flyer. It coasts in quite nicely for landings as well and is pretty tough as i had a couple pretty rough landings. Once i get this beast tamed some more ill attempt the 11V again. All in all im pretty impressed with this jet for the cost.. It was about 50 bucks canadian and well worth the money. Im hooked on jets now.