Hallo there,
I have a problem on my new MVVS 58.
I Installed 22x10 3 blade prop from mejzlick.
Everythings it'ok at start. Engine starts normal - sometimes backward - RPM is 6600 -
After few minutes - maybe when it come hot - engine has a tendency to cut off starting from minimum to max.
I open needle L until 2/half turns.
The needle H is at basic setting eg. 1 turn and ten minutes.
I tried to fly but engines cut off after few minutes.
At this setting seems to improve but I am not sure.
Please Help me.

Danilo