RE: Help with Raven 50!!!!!!!!!!!!!!!!!!!!
For sure, the one with the control rod going to the rear ball on the swashplate will be plugged into the "elevator" port of the RX (#2 in a Futaba) and one of the front ones will be to the aileron port (#1 in Futaba) and the other to the Collective port (#6 in Futaba). The rudder servo into the gyro and the gyro into the rudder port of the RX (#4 in Futaba). The sensitivity/gain wire would go to the AUX port on the RX (#5 in Futaba) and the throttle servo to the throttle port (#3 in Futaba)