RCU Forums - View Single Post - Sig Rascal 110 Engine Recommendations
View Single Post
Old 01-09-2003 | 04:13 AM
  #9  
Deca-x
Junior Member
 
Joined: Dec 2002
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
From: San Antonio TX
Default Sig Rascal 110 Engine Recommendations

I have flown the Sig 110 rascal for about a week now and it is a great flying plane. I put an OS 1.60 on the front of mine and i am very pleased with the results. The manual calls for a 1.5 2c glow for max 2c but I wanted some power on the plane. I am swinging a 20/6 prop and this will hover the airplane at half throttle and will torque roll ever so slowly. I have the CG right at 5" and the plane weighs 13 pounds 3 ounces. I modified the elevator so that each side has its own servo and removed some of the elevator so I could get more rudder movement. The modifications and the engine that I put on the Rascal where not recommended in the manual and I am not recommending that anyone do this to their Rascal.

The only thing that I do not like about the plane is the roll rate. It is a little to slow for me but I give it an A+ on everything else.