RCU Forums - View Single Post - C-130 Engine question
View Single Post
Old 09-18-2006 | 10:01 AM
  #4  
BillS
Senior Member
 
Joined: Sep 2004
Posts: 3,312
Likes: 0
Received 1 Like on 1 Post
From: Greensboro, NC
Default RE: C-130 Engine question


ORIGINAL: UkerDuker

I am planning to build a Palmer 132" C-130. I want to get some ideas on the size engines to use. I see many people using .25's on the smaller C-130 versions.

Would 4 OS .52 four strokes be too little power?

Mike
Mike,

My opinion is .25’s will be too small for a 132” span C 130.

I am flying .25’s on an 8-pound Cherokee twin and the power is about right. I am flying .40’s on another 10-pound twin and the power is more than enough. I have had two .25’s on a 10 1/2 pound twin and the power was marginal. I recently acquired a 91” C 130 wing and believe .25’s will be approximately correct if the all up weight is less than 20 pounds.

Hope the information helps.

Bill