Tried attaching multiple photos but that didn't work... here is one of the prop rack.

Charging rack in previous photo is set up so that (6) wall chargers can be plugged in at once and all trickle through a TME cycler feeding the power strip. The cords on the wall chargers are long enough to plug into the second power strip which is hooked up for constant charging. Each wall charger feeds (1) plane's transmitter and receiver. This way, all the planes and all the transmitters are charged in place and I just plug the trailer in when I get home.
The Hobbico AccuCycler is used to custom charge non-standard battery packs and I ran cables that are long enough to reach any fuselage or any of the transmitters.

Has been working great for the past couple of weeks, and as a bonus I've managed not to burn anything down!