Thanks guy's for this great info on the Hitec 475's. I have my Bling on order and it should be here by Monday. I have decided to install JR 9411's for the ailerons. I have them in another plane that does not need that good of a servo. I'll put my Hitec 475's in it. I will then use two Futaba 9202's on the elevator and a JR ST-125 for the rudder. That will give me 98oz servo's for the aileron's, 98oz servo's for the elevator and 143oz on the rudder. I will power the servo's and JR PCM receiver with a 2000mah 6v nimh battery. I will also use a Hitec 475 on the throttle. This makes for a total of 8 servo's.