Glow to Electric Conversion
I'm sure this question has been asked in many variations before, but I'll ask anyway.
I am starting a powered Glider project that calls for a .19 to .25 glow engine, but I would rather use an electric. I am new to this aspect of our obession (er, I meant hobby) and would like to know which size electric would be best suited for this model. The specifics are as follows:
Wing Span- 105"
Wing Chord/Area- 11.5 Root, 9 Tip/ 1086 sq in.
Flying Weight (as a glow aircraft)- 64 oz.
Wing Loading- 17oz/ sq ft.
What I am looking for the motor to do is gain me some air under the fuse so I can glide for a while. That's why I want the electric. It'll save the weight of a servo to run the throttle and I can shut it down completely in flight and re-start it when needed.
Any advice of which size of motor and which manufacturers would be greatly appreciated. Also any advice on gearing versus direct drive would be very helpful.
Ed