These two set up easily and got along well before and after my first crash. Repaced the JR 285s on cyclic with HiTec 65MGs which I hope use fewer gear repacements [sm=omg_smile.gif] Sometime during reprogramming I tried to reset the integral timing but reset the model data by mistake. So all the system and function settings had to be restored to the Align/Horizon instructions' values. Now the left stick operate the rudder OK but up and down seems to operate elevator cyclic and the right stick up and down seems to operate the throttle/CP. Set to 120 deg. 3 servo swash and all servos plugged in correct ports but I sure missed something. HALP!
Chris