Hi again, I'm having problems priming my Genesis.
I cant get any fuel up the fuel line no matter what I try, I've tried my finger over the exhaust while turning over engine but nothing happens.
i've triend doing the same at the exhaust outlet on the rear of the engine, I could feel the vacuum here but still no fuel coming up the line.
I noticed the Header gasket was a little damaged so I put a new one in and refit the exhaust again, but still unable to prime at all and last of all I tried opening the carb while turning over but still not getting any fuel to come up the lines.

Should I try installing a inline Fuel pump/filter? or is there something thats causing this to happen.

Thanks
-Jed