RCU Forums - View Single Post - engine mounting on profile plane
View Single Post
Old 02-04-2007 | 09:25 AM
  #4  
Cyclic Hardover's Avatar
Cyclic Hardover
Senior Member
My Feedback: (3)
 
Joined: May 2002
Posts: 7,296
Likes: 0
Received 1 Like on 1 Post
From: New Mexico,
Default RE: engine mounting on profile plane

This is all normal you guys. These things need right thrust to compensate for the torque effect. it's a long story. The "ol farts" are still in bed, they'll explain it better when they wake up. The plane set up if fine. Most Arfs now come with right thrust built into the firewall. You can tell by standing over the top of the plane and looking down it. Before this, we use to have to do it manually by placing things like washers behind the left side of the mount