RCU Forums - View Single Post - Brushless question
Thread: Brushless question
View Single Post
Old 03-02-2007 | 06:26 PM
  #7  
p01rogue's Avatar
p01rogue
Senior Member
 
Joined: Jul 2006
Posts: 288
Likes: 0
Received 0 Likes on 0 Posts
From: Kitchener, ON, CANADA
Default RE: Brushless question
ORIGINAL: rstacy

We run the E-flite 370/4100kv, with 8 tooth pinion and another one with an 11 tooth pinion. Kyle prefers the performance of the 11 tooth but the battery takes a beating. Although the 8 tooth is OK, I think we will settle on the 10 tooth.
We run the E-flite 20 amp esc for main, and a gws ICS50 2 amp esc and G90 gyro for the direct drive tail setup.

Here is a video of the 8 tooth
http://www.raymondstacy.com/pics/bladecp172007.wmv

Here is the 11 tooth
http://www.raymondstacy.com/pics/kbcpp.wmv

Can someone please link me up with part numbers for this tail conversion!

Also, Mr Stacy, could you possibly list the dx7 program settings for the blade cpp.
I'd like to buy this radio and would appreciate a hand with the settings!
p01rogue is offline  
Reply Like