RCU Forums - View Single Post - what size RX batt for a Razzle 3D?
View Single Post
Old 02-12-2003 | 05:33 PM
  #4  
arrio
Member
My Feedback: (17)
 
Joined: Jan 2002
Posts: 55
Likes: 0
Received 0 Likes on 0 Posts
From: Newport News, VA
Default what size RX batt for a Razzle 3D?

Thanks guys. Last night I bought online, two 5cell packs, an 1850Ma and a 2700Ma NiMH. Looks like I will be useing te 1850.
I usually just do heli's and I like to have alot of reserve power in my RX packs. So generally I run at least 2000Ma in them. I remembered that fixed wings don't usually consume as much battery, but I wasn't sure were the general comfort level was. I could use the 2700 in my choppers anyway.

Most of my stuff should in by the weekend. Plane, engine, servos batteries, props. I ordered APC props 14x4 and 15x4, Zinger 14x4 and 14x5. Hopefully one of these will work out.
I likely won't get to fly it till the following weekend. Weather is calling for rain all this weekend anyway.

Really looking forward to flying this Razzle!