I have a problem that I hope you can solve. When I am using the cyclic Input on the Tx, The blades on the heli do hot react as they should. For example, when south on the Tx cyclic control, the blades tilt hard south east. When I push north on the cyclic the blades tilt hard north west. When I pull East, the blades tilt north east. When I pull west, the blades tilt south west. The trims are centered, the swash plate is level, the pitch control linkages are even, there is now blade tracking, no paddle traking, no significant vibration, the spindale is straight. I've done as much as I know how and I cannot get the blades to tilt exactly according to the cyclic input. Any help is appreciated. Note, it will still hover and fly but it is almost impossible to control......Ben