I recently purchased a BobCat and am almost finished with it. I have never flown a jet and I quickly realized I probably should start with a trainer first. I could not find one I liked so I came up with my own design. I started on it several months ago. When I took it to the flying field to show a friend another club member says it looks a lot like the Facet. It is almost the same, but has a fully semetrical low wing. I have a Wren MW54 I am going to put on it.

I have attached a picture. It has a 72" wingspan and is all balsa and plywood. If there is enough interest I may try to kit it.

Any comments or suggestions are welcomed.

Hal