Hey turbo........... I live in Federal Way, not too far from where you are at. Lived in North Bend for about 4 years..........before that on Snoqualmie Pass for 16.
I am not an expert by any means but could certainly take a look at your setup and see if theres anything that could possibly make your life easier. I would suggest getting a set of flat woodies and try moving the servo links in one hole to start, and some added flybar weights. I had good luck with my blade cp by getting it weighted down. Training Gear will help lower your center of gravity also and helps stop some of the dreaded tipover "spindle/main masher" incidents. Shoot me a PM and will see if I can maybe give you a few ideas.


__________________________________________________ ________________________________________


Of all the things I ever lost............................................. I miss my mind the most!